|
| |
|
Each Housing Comes w/ Wide
Dynamic Range 550 TVL Camera w/ Your Choice of 2.8-12 mm or 5-50mm |
|
NAME |
MODEL |
PICTURE |
PRICE(USD) |
PRODUCT SPECIFICATIONS |
EXPLOSIONPROOF MODE |
|
EXPLOSION-PROOF PRODUCTS |
Explosion
-proof
Camera Housing
|
WTF801-316L |
|
1999 |
316L stainless steel,
corrosion proof, dustpalliative, watertightness; front and rear caps
with ex-proof thread; 2×G1/2” Ex-proof cable entries, Dia. of inner hole
Φ12; inside dimensions(mm) Φ112×300; Weight 6kg;Optional power supply
and inner heating. |
ExdⅡCT6/DIP A20 TA,T6/IP68 |
|
WTF801-304 |
1299 |
304 stainless steel,
corrosion proof, dustpalliative, watertightness; front and rear caps
with ex-proof thread; 2×G1/2” Ex-proof cable entries, Dia. of inner hole
Φ12; inside dimensions(mm) Φ112×300; Weight 6kg; Optional heater works
automatically to keep proper temperature of inside of the housing by
built-sensor; Optional power supply and inner heating. |
|
WTF800-316L |
|
2999 |
316L stainless steel, with wiper,
sunWTield and built-in wiper controller; corrosion proof, dustpalliative,
watertightness; front and rear caps with ex-proof thread; 2×G1/2”
Ex-proof cable entries, Dia. of inner hole Φ12; inside dimensions(mm)
Φ125×330; Heater works automatically to keep proper temperature of
inside of the housing by built-sensor; Optional power supply and inner
heating. |
ExdⅡCT6/DIP A20 TA,T6/IP68 |
|
WTF800-304 |
1299 |
304 stainless steel, with wiper
inside,sunWTield and Built-in decoder; corrosion proof, dustpalliative,
watertightness; front and rear caps with ex-proof thread; 2×G1/2”
Ex-proof cable entries, Dia. of inner hole Φ12; inside dimensions(mm)
Φ125×330; Optional heater works automatically to keep proper temperature
of inside of the housing by built-sensor; Optional power supply and
inner heating. |
|
WTF803-316L |
|
1299 |
316L stainless steel,
corrosion proof, dustpalliative, watertightness; front cap with epoxide
resin embedded and rear cap with thread; 1×G1/2”Ex-proof cable entry ,
Dia. of inner hole Φ13; inside dimensions(mm) Φ100×211; Weight 4kg;
Optional heater works automatically to keep proper temperature of inside
of the housing by built-sensor;
Optional power supply and inner heating. |
ExdⅡCT6/DIP
A20 TA,T6/IP68 |
|
WTF803-304 |
999 |
304 stainless steel,
corrosion proof, dustpalliative, watertightness; front cap with epoxide
resin embedded and rear cap with thread; 1×G1/2”Ex-proof cable entry ,
Dia. of inner hole Φ13; inside dimensions(mm) Φ100×211; Weight
4kg; Optional heater works automatically to keep proper temperature of
inside of the housing by built-sensor; Optional power supply and inner
heating. |
|
WTF302-316L |
|
2999 |
The 316L stainless steel,
corrosion-proof ability, dust palliative,
watertightness, weight 13kg; sight glass defroster and optional heating
function, inside dimension(mm) 300×75×80 which can place zoom lens or
the integrated camera. |
ExdIICT6/IP68 |
|
WTF302-304 |
1599 |
The 304 stainless steel,
corrosion-proof ability, dust palliative,
watertightness, weight 13kg; sight glass defroster and optional heating
function, inside dimension(mm) 300×75×80 which can place zoom lens or
the integrated camera. |
|
WTF301-316L |
|
3999 |
The 316L stainless steel,
corrosion-proof ability, dust palliative, watertightness, weight 17kg;
sight glass defroster and optional heating function, inside dimension(mm)
370×100×100 which can place zoom lens or the integrated camera. |
ExdIICT6/IP68 |
|
WTF301-304 |
2999 |
The 304 stainless steel,
corrosion-proof ability, dust palliative,
watertightness, weight 17kg; sight glass defroster and optional heating
function, inside dimension(mm) 370×100×100 which can place zoom lens or
the integrated camera. |
|
WTF300-316L |
|
4299 |
The 316 L stainless steel;
with wiper and sunWTield, sight
glass defroster and auto-heating function, inside demensions(mm)
370×105×110; Weight 23kg; |
ExdIICT6/IP68 |
|
WTF300-304 |
3299 |
The 304 stainless steel; with wiper
and sunWTield, sight glass defroster and auto-heating function, inside
demensions(mm) 370×105×110; Weight 23kg; |
|
2999 |
|
Stainless steel Camera Housing |
WTF720-316L |
|
2999 |
The 316L stainless steel,
Front and rear caps with threaded flameproof
joints and silastic gasket ring, 2 corrosion-proof cable entries, inner
hole dia.ф10; with inside wiper and permanent-magnet D.C. motor
decelerates with gear, Lubricated all-wheel inner parts; Inside
dimensions (mm) ф125×330; Weight 5kg, Built-in controller |
IP68 |
|
WTF720-304 |
1499 |
The 304 stainless steel,
Front and rear caps with threaded flameproof
joints and silastic gasket ring, 2 corrosion-proof cable entries, inner
hole dia.ф10; with inside wiper and permanent-magnet D.C. motor
decelerates with gear, Lubricated all-wheel inner parts; Inside
dimensions (mm) ф125×330; Weight 5kg, Built-in controller |
|
WTF721-316L |
|
1499 |
The 316L stainless steel,
Front and rear caps with threaded flameproof joints and silastic gasket
ring, 2 corrosion-proof cable entries, inner hole dia.ф10; Inside
dimensions (mm) ф100×280; Weight 2kg |
IP68 |
|
WTF721-304 |
999 |
The 304 stainless steel,
Front and rear caps with threaded flameproof
joints and silastic gasket ring, 2 corrosion-proof cable entries, inner
hole dia.ф10; Inside dimensions (mm) ф100×280; Weight 2kg |
|
1044 |
|
Water-cooled Camera Housing |
WTL701-316L |
|
1999 |
The 316L dual-layer stainless steel,
2 water-proof cable entries , inner hole Dia.ф10,
Sight glass dimensions (mm) ф65, Inside dimensions (mm) ф100×280, Weight
4kg, Operating temperature 0~+250℃,
Atmosphere pressure 86~106 Kpa, Dust concentration
≤200mg
/ m3
Inlet water temperature
≤35℃,
Flow 0.3~0.6L/s, Inlet hydraulic pressure 0.1Mpa, Air-compression
pressure 0.1~0.4Mpa, Flow of air 0.3~0.6L/s |
IP68 |
|
WTL701-304 |
1699 |
The 304 dual-layer stainless steel,
2 water-proof calbe entries , inner hole Dia.ф10, Sight glass dimensions
(mm) ф65, Inside dimensions (mm) ф100×280, Weight 4kg, Operating
temperature 0~+250℃,
Atmosphere pressure 86~106 Kpa, Dust concentration
≤200mg
/ m3
Inlet water temperature
≤35℃,
Flow 0.3~0.6L/s, Inlet hydraulic pressure 0.1Mpa, Air-compression
pressure 0.1~0.4Mpa, Flow of air 0.3~0.6L/s |
|
WTL702A-316L |
|
2499 |
The 316L dual-layer stainless steel,
2 water-proof calbe entries , inner hole Dia.ф10,
Sight glass dimensions (mm) ф8, Inside dimensions (mm) ф100×280, Weight
8kg, Operating temperature 0~+250℃s,
Inlet hydraulic pressure 0.1Mpa, Air-compression pressure 0.1~0.4Mpa,
Flow of air 0.3~0.6L/s |
|
|
WTL702A-304 |
1699 |
The 304 dual-layer stainless steel,
2 water-proof calbe entries , inner hole Dia.ф10,
Sight glass dimensions (mm) ф8, Inside dimensions (mm) ф100×280, Weight
8kg, Operating temperature 0~+250℃,
Atmosphere pressure 86~106 Kpa, Dust concentration
≤200mg
/ m3
Inlet water temperature
≤35℃,
Flow 0.3~0.6L/s, Inlet hydraulic pressure 0.1Mpa, Air-compression
pressure 0.1~0.4Mpa, Flow of air 0.3~0.6L/s |
|
|
WTL702B-316L |
|
2999 |
The 316L dual-layer stainless steel,
2 water-proof calbe entries , inner hole Dia.ф10,
Sight glass dimensions (mm) ф8, Inside dimensions (mm) ф140×320, Weight
8kg, Operating temperature 0~+250℃,Atmosphere
pressure 86~106 Kpa, Dust concentration
≤200mg
/ m3
Inlet water temperature
≤35℃,
Flow 0.3~0.6L/s, Inlet hydraulic pressure 0.1Mpa, Air-compression
pressure 0.1~0.4Mpa, Flow of air 0.3~0.6L/s |
IP68 |
|
WTL702B-304 |
1899 |
The 304 dual-layer stainless steel,
2 water-proof calbe entries , inner hole Dia.ф10,
Sight glass dimensions (mm) ф8, Inside dimensions (mm) ф140×320, Weight
8kg, Operating temperature 0~+250℃,
Atmosphere pressure 86~106 Kpa, Dust concentration
≤200mg
/ m3
Inlet water temperature
≤35℃,
Flow 0.3~0.6L/s, Inlet hydraulic pressure 0.1Mpa, Air-compression
pressure 0.1~0.4Mpa, Flow of air 0.3~0.6L/s |
|
Wind-cooled Camera Housing |
WTL711-316L |
|
1699 |
The 316L dual-layer stainless steel,
With semi-fixed pan/tilt, 2 water-proof calbe
entries , inner hole Dia.ф10, Air entry G1/4”, Sight glass dimensions
(mm) ф65, Inside dimensions (mm) ф100×280, Weight 3kg, Operating
temperature
≤80℃,
Atmosphere pressure 86~106Kpa, Dust concentration
≤200mg
/ m3
Inlet Air-compression temperature
≤35℃,
Flow of air 0.3~0.6L/s, Air-compression pressure 0.1~0.6Mpa |
IP66 |
|
WTL711-304 |
1299 |
The 304 dual-layer stainless steel,
With semi-fixed fan/tilt, 2 water-proof calbe
entries , inner hole Dia.ф10, Air entry G1/4”, Sight glass dimensions
(mm) ф65, Inside dimensions (mm) ф100×280, Weight 3kg, Operating
temperature
≤80℃,
Atmosphere pressure 86~106Kpa, Dust concentration
≤200mg
/ m3,
Inlet Air-compression temperature
≤35℃,
Flow of air 0.3~0.6L/s, Air-compression pressure 0.1~0.6Mpa |
|
WTL712-316L |
|
1999 |
The 316L dual-layer stainless steel,
2 water-proof calbe entries , inner hole Dia.ф10,
Air entry G1/4”, Sight glass dimensions (mm) ф65, Inside dimensions (mm)
ф100×280, Weight 4kg, Operating temperature
≤150℃,
Atmosphere pressure 86~106Kpa, Dust concentration
≤200mg
/ m3,
Inlet Air-compression temperature
≤35℃,
Flow of air 0.3~0.6L/s, Air-compression pressure 0.1~0.6Mpa |
IP66 |
|
WTL712-304 |
1699 |
The 304 dual-layer stainless steel,
2 water-proof calbe entries , inner hole Dia.ф10,
Air entry G1/4”, Sight glass dimensions (mm) ф65, Inside dimensions (mm)
ф100×280, Weight 4kg, Operating temperature
≤150℃,
Atmosphere pressure 86~106Kpa, Dust concentration
≤200mg
/ m3,
Inlet Air-compression temperature
≤35℃,
Flow of air 0.3~0.6L/s, Air-compression pressure 0.1~0.6Mpa |
|
